The following are included in our thorough air conditioning service. 

1. Check air filters. Clean or replace as necessary.

2. Check for adequate refrigerant charge

3. Check condenser and clean if necessary

4. Lubricate condenser fan motor

5. Check condenser fan blades for tightness

6. Tighten electrical connections at equipment

7. Check voltage at unit under load

8. Check condensate drain for blockage. Clean as necessary

9. Check blower belt for condition, tension, and alignment.

10. Lubricate all bearings where applicable

11. Check blower for cleanliness

12. Check all safety controls

13. Inspect contactor points

14. Check and clean thermostat

15. Check lockout control

16. Inspect evaporator coil cleanliness

17. Inspect starting capacitor

18. Inspect running capacitor

19. Check for vibration and noise

20. Inspect relays

21. Check and record running and starting amperages

22. Check and record suction and discharge pressures

23. Make recommendations of any needed repairs to the air conditioning system